EPOXY ADHESIVES

 

 

CRYSTAL CLEAR EPOXY

Crystal Clear Epoxy combines epoxy-bonding strength with exceptional clarity. A two part epoxy that is mixed in equal volume to produce a high-strength bond between almost any material.

It is waterproof, oil proof, and unaffected by solvents and most acids or alkalis. It will not shrink and can be applied as thick as desired in one application. Durable and permanent.
  • Super strength invisible bond
  • Equal volume mixing - no weighing or critical metering
  • 100% reactive epoxy - no solvent
  • Cures at room temperature - initial jell in 10 to 20 minutes, maximum strength in 4 to 8 hours.
  • Sets in 2 to 5 minutes when heated to approximately 110 degrees Fahrenheit for 10 to 15 seconds.
  • Pot life and curing time can be increased to several hours by adding Helor Hi-Water Epoxy Thinner after mixing.

Our CURED Crystal Clear Epoxy Adhesive has the following physical properties:

Bond Strength (ASTM - D897) 1070 psi
Tensile Strength (ASTM - C-190-49) 1520 psi
Tensile Shear (ASTM - D-1002) 396 psi
Linear Shrinkage in. per in. (48hrs) 0.0004

 

GENERAL PURPOSE EPOXY ADHESIVES

 

This product is an easy to use two-part epoxy adhesive having excellent adhesion to many materials: concrete, wood, metal, glass, paper, and many plastics. It gives a powerful chemical bond between dissimilar or similar materials. In many cases, the bond will be stronger than the materials themselves. It gives excellent bond between old concrete and freshly poured concrete. Will bond very thin layers of freshly poured mortar or concrete to old surfaces, eliminating the problem of shrinkage and loss of adhesion.

Physical Properties:

Color Amber
Pot Life 45 minutes to 1 hour
Initial Set 1 to 2 hours
Shrinkage after 3 days 0.00063 inch per inch

Viscosity:

Resin 611 1100 cps
Hardener 610 7400 cps
Mixed (1 part 611 to 1 part 610) 2100 cps


 

Home | Fishing Rod Mfgs | UV Curable | Clear Epoxy | Brass Coatings | Customers | Contact

©2002 Epoxy Coatings Co. All Rights Reserved